Journalartikel

On the long-term aging of S-phase in aluminum alloy 2618A


AutorenlisteRockenhauser, Christian; Rowolt, Christian; Milkereit, Benjamin; Darvishi Kamachali, Reza; Kessler, Olaf; Skrotzki, Birgit

Jahr der Veröffentlichung2021

Seiten8704-8716

ZeitschriftJournal of Materials Science

Bandnummer56

Heftnummer14

ISSN0022-2461

eISSN1573-4803

Open Access StatusHybrid

DOI Linkhttps://doi.org/10.1007/s10853-020-05740-x

VerlagSpringer


Abstract
The aluminum alloy 2618A is applied for engine components such as radial compressor wheels which operate for long time at elevated temperatures. This results in coarsening of the hardening precipitates and degradation in mechanical properties during the long-term operation, which is not taken into account in the current lifetime prediction models due to the lack of quantitative microstructural and mechanical data. To address this issue, a quantitative investigation on the evolution of precipitates during long-term aging at 190 degrees C for up to 25,000 h was conducted. Detailed transmission electron microscopy (TEM) was combined with Brinell hardness measurements and thorough differential scanning calorimetry (DSC) experiments. The results show that GPB zones and S-phase Al2CuMg grow up to < 1,000 h during which the GPB zones dissolve and S-phase precipitates form. For longer aging times, only S-phase precipitates coarsen, which can be well described using the Lifshitz-Slyozov-Wagner theory of ripening. A thorough understanding of the underlying microstructural processes is a prerequisite to enable the integration of aging behavior into the established lifetime models for components manufactured from alloy 2618A.



Zitierstile

Harvard-ZitierstilRockenhauser, C., Rowolt, C., Milkereit, B., Darvishi Kamachali, R., Kessler, O. and Skrotzki, B. (2021) On the long-term aging of S-phase in aluminum alloy 2618A, Journal of Materials Science, 56(14), pp. 8704-8716. https://doi.org/10.1007/s10853-020-05740-x

APA-ZitierstilRockenhauser, C., Rowolt, C., Milkereit, B., Darvishi Kamachali, R., Kessler, O., & Skrotzki, B. (2021). On the long-term aging of S-phase in aluminum alloy 2618A. Journal of Materials Science. 56(14), 8704-8716. https://doi.org/10.1007/s10853-020-05740-x



Schlagwörter


AL-CU-MG

Zuletzt aktualisiert 2025-10-06 um 11:20