Journalartikel

Jahr der Veröffentlichung: 2019

Seiten: 530-532

Zeitschrift: International Journal of Prosthodontics

Bandnummer: 32

Heftnummer: 6

ISSN: 0893-2174

eISSN: 1942-4426

DOI Link: https://doi.org/10.11607/ijp.6210

Verlag: Quintessence Publishing

Abstract: 
Purpose: To investigate whether (1) the curing mode and (2) the use of the corresponding or noncorresponding crown luting system have an impact on the microleakage of computer-aided design/computer-assisted manufacture (CAD/CAM) composite crowns after chewing simulation. Materials and Methods: Two CAD/CAM composite blocks (Lava Ultimate [n = 20] and LuxaCam Composite [n = 20]) and their luting systems and curing modes (light curing [LC] or chemical curing [CC]) were investigated. A dye penetration test was used to detect the presence of microleakage. Results: Independently of the luting system, the LC groups showed a significantly lower microleakage compared to the CC groups (P <.05). Furthermore, the CC groups exhibited a reduction of microleakage if the CAD/CAM block and luting system were from the same manufacturer. Conclusion: For the CC mode, the corresponding block and luting system should be used.

Harvard-Zitierstil: Schlenz, M., Skroch, M., Schmidt, A., Rehmann, P. and Woestmann, B. (2019) Influence of Different Luting Systems on Microleakage of CAD/CAM Composite Crowns: A Pilot Study, International Journal of Prosthodontics, 32(6), pp. 530-532. https://doi.org/10.11607/ijp.6210

APA-Zitierstil: Schlenz, M., Skroch, M., Schmidt, A., Rehmann, P., & Woestmann, B. (2019). Influence of Different Luting Systems on Microleakage of CAD/CAM Composite Crowns: A Pilot Study. International Journal of Prosthodontics. 32(6), 530-532. https://doi.org/10.11607/ijp.6210