Konferenzpaper

Low-frequency instabilities in the operation of metallic multi-microchannel evaporators


AutorenlisteHenning, Torsten; Brandner, Juergen J.; Schubert, Klaus; Lorenzini, Marco; Morini, Gian Luca

Jahr der Veröffentlichung2007

Seiten834-841

ZeitschriftHeat Transfer Engineering

Bandnummer28

Heftnummer10

ISSN0145-7632

eISSN1521-0537

DOI Linkhttps://doi.org/10.1080/01457630701378242

Konferenz6th International Conference on Boiling Heat Transfer

VerlagTaylor and Francis Group


Abstract
Visualization by high- speed videography and infrared surface thermography was used to compare the spatial and temporal maldistribution of flow, manifesting itself in pulsation and hot spot formation, respectively, in water evaporators consisting of either a single metallic foil with an array of mechanically micromachined microchannels or of several such foils assembled into an electrically powered micro heat exchanger. In the single layer devices examined by high- speed videography, pulsation in the frequency range below 20 Hz was found to be dominated by the generation of large bubbles in the inlet plenum. A redesign of the inlet with microchannels instead of a large plenum eliminated the pulsation at sub- audio frequencies, at the expense of a significantly increased pressure drop across the device. Infrared thermography of an electrically powered micro heat exchanger operated as an evaporator showed the formation of metastable hot spots as the result of maldistribution among different microchannel array layers. The formation of these hot spots could be eliminated by operating the device under heater cartridge temperature control conditions instead of constant power conditions.



Autoren/Herausgeber




Zitierstile

Harvard-ZitierstilHenning, T., Brandner, J., Schubert, K., Lorenzini, M. and Morini, G. (2007) Low-frequency instabilities in the operation of metallic multi-microchannel evaporators, Heat Transfer Engineering, 28(10), pp. 834-841. https://doi.org/10.1080/01457630701378242

APA-ZitierstilHenning, T., Brandner, J., Schubert, K., Lorenzini, M., & Morini, G. (2007). Low-frequency instabilities in the operation of metallic multi-microchannel evaporators. Heat Transfer Engineering. 28(10), 834-841. https://doi.org/10.1080/01457630701378242



Schlagwörter


FLOW PATTERNSHEAT-TRANSFER


Nachhaltigkeitsbezüge


Zuletzt aktualisiert 2025-01-04 um 22:52