Journal article

Publication year: 2021

Pages: 47488-47498

Journal: ACS Applied Materials & Interfaces

Volume number: 13

Issue number: 40

ISSN: 1944-8244

Open access status: Hybrid

DOI Link: https://doi.org/10.1021/acsami.1c11750

Publisher: American Chemical Society

Abstract: 

All solid-state batteries offer the possibility of increased safety at potentially higher energy densities compared to conventional lithium-ion batteries. In an all-ceramic oxide battery, the composite cathode consists of at least one ion-conducting solid electrolyte and an active material, which are typically densified by sintering. In this study, the reaction of the solid electrolyte Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP) and the active material LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) is investigated by cosintering at temperatures between 550 and 650 °C. The characterization of the composites and the reaction layer is performed by optical dilatometry, X-ray diffractometry, field emission scanning electron microscopy with energy dispersive X-ray spectroscopy, time-of-flight secondary ion mass spectrometry, as well as scanning transmission electron microscopy (STEM). Even at low sintering temperatures, elemental diffusion occurs between the two phases, which leads to the formation of secondary phases and decomposition reactions of the active material and the solid electrolyte. As a result, the densification of the composite is prevented and ion-conducting paths between individual particles cannot be formed. Based on the experimental results, a mechanism of the reactions in cosintered LATP and NCM622 oxide composite cathodes is suggested.

Harvard Citation style: Beaupain, J., Waetzig, K., Otto, S., Henss, A., Janek, J., Malaki, M., et al. (2021) Reaction of Li1.3Al0.3Ti1.7(PO4)(3) and LiNi0.6Co0.2Mn0.2O2 in Co-Sintered Composite Cathodes for Solid-State Batteries, ACS Applied Materials & Interfaces, 13(40), pp. 47488-47498. https://doi.org/10.1021/acsami.1c11750

APA Citation style: Beaupain, J., Waetzig, K., Otto, S., Henss, A., Janek, J., Malaki, M., Pokle, A., Müller, J., Butz, B., Volz, K., Kusnezoff, M., & Michaelis, A. (2021). Reaction of Li1.3Al0.3Ti1.7(PO4)(3) and LiNi0.6Co0.2Mn0.2O2 in Co-Sintered Composite Cathodes for Solid-State Batteries. ACS Applied Materials & Interfaces. 13(40), 47488-47498. https://doi.org/10.1021/acsami.1c11750